iPhone 3.0 and BMW iDrive, it’s all still working

After 7 days testing before the official iPhone 3.0 software update, I’m happy to report that iPhone 3.0 software works perfectly with BMW bluetooth and iDrive.

bmw_iphone3.0

As many of you may know, historically Apple updates have had a tendency to break BMW iDrive communicating with iPhones to sync contacts and make/receive calls.

Apple’s latest update, iPhone 3.0, is launched today (17th June 2009) and I thought I’d let you all know that I’ve had iPhone 3.0 up and running on my iPhone a little early. I’m happy to report that over the last 7 days the iPhone has been working flawlessly with my BMW iDrive, all contacts have been syncing and calls received and made without any issues.

So rest assured you can update your iPhone software to iPhone 3.0 and continue to drive safely with your iPhone fully connected to your iDrive.

iPhone30BMW

Recent queries:

  • iphone 3 0 update
  • BMW FULL ISKIN

Range Rover / Land Rover Bluetooth PIN

Trying to connect a phone to your Range Rover or Land Rover bluetooth but don’t know the default PIN? Try 2121

Range Rover PIN is 2121
Range Rover PIN is 2121

I recently tried to connect my iPhone to the built in bluetooth on a Range Rover Sport and whilst the phone could see the car’s bluetooth and start pairing I was being prompted for a PIN number which I didn’t know.

On iDrive equipped BMW’s you pick your own code to enter on the phone, say 1234 and then the car asks you to confirm this code on the iDrive.

On much older Nokia car kits the code was written on a sticker on the hardware so you had to make note of it but all the recent Nokia kits just use 0000 as the code.

I tried 1234, 0000 and some other defaults to connect my phone to the Range Rover Bluetooth and it didn’t accept them. I have since discovered (in the manual but obviously couldn’t check this easily) that the bluetooth PIN for all Range Rovers and Land Rovers is 2121.

[This blog entry is merely a reminder for me of the PIN for the future but it may come in useful to others]

Recent queries:

  • range rover bluetooth code
  • land rover bluetooth code
  • range rover sport bluetooth code
  • land rover bluetooth pin
  • range rover bluetooth pin
  • range rover sport bluetooth pin

iPhone 3G and BMW iDrive compatibility

Information about Apple’s new iPhone 3G and its compatibility with BMW’s factory fitted bluetooth, iDrive and snap-in adapters.

BMW iDrive and iPhone 3G

With the immenent launch of Apple’s iPhone 3G a week today, I’ve been searching the internet high and low to find out whether or not it’s going to be compatible with and sync with BMW’s bluetooth and iDrive. I also need to know whether it will fit in the BMW snap-in adapter I have for the original iPhone or will I have to buy another cradle from BMW?

Once I get the new iPhone 3G on 11th July I’ll update this topic with the actual answers, but for now I shall just give my preditions:

My predictions:

  1. Bluetooth & iDrive: UPDATE – Be aware that several people have reported that the iPhone 3G does not sync the contacts with the iDrive, this is also the case for people who have updated their original iPhone to 2.0, including myself (more info here). The iPhone 3G doesn’t appear to have any hardware changes in relation to its bluetooth module and since the iPhone 3G and iPhone original will both be running iPhone software v2.0 next week, other than addition coding for the GPS module and 3G connections they should be identical. So I am predicting that the iPhone 3G will work with BMW’s bluetooth and iDrive, [Note: if you have an older vehicle that the original iPhone didn’t pair with don’t expect the iPhone 3G to suddenly work, I’m only referring to vehicles that pair and sync with the original iPhone]
  2. BMW snap-in adapter: Looking at the profile of the new iPhone 3G with its more sculptured and curved back,┬ácoupled with┬áthe fact that many case manufacturers are launching new cases for the iPhone 3G lead me to believe that the iPhone 3G will not fit in the BMW snap-in adapater for the original iPhone and that BMW will bring out a new cradle for the iPhone 3G in a few months. But then part of me thinks that the iPhone 3G uses the same screen, iPod port, etc, is the same height and width and that it may fit in the snap-in cradle for the original iPhone albeit it a little loose and wobble. My final thoughts…I predict the iPhone 3G will fit in the original BMW snap-in adapter but it won’t lock down into place fully but will charge and connect to the external antenna.

The actual facts:

  1. The iPhone 3G and original iPhones updated to iPhone 2.0 appear to not work properly with lots of manufacturers factory blueotooth kits. BMW, Mercedes, Jeep, Chrysler, Land Rover, and many more are all affected.
  2. The iPhone 3G *does* fit in the original BMW iPhone cradle….just! But it’s not a comfortable fit as the iPhone 3G is a few mm longer. Prolonged forced insertion into the cradle will badly scratch and damage the back and top edge of your iPhone 3G.

Recent queries:

  • is i drive in BMW cars is compatable with iphones